Stand in front of the pasta sauce shelf at almost any Canadian grocery store and you'll see a wall of jars, each with its own little shelf tag listing a total price and, usually, a smaller number below it — something like "$1.12/100 mL." That smaller number is the unit price, and it's one of the few tools on the shelf that lets you compare two differently sized products on equal footing. Most shoppers walk right past it. That's a mistake, especially with package sizes shifting more often than they used to.
This guide covers what unit pricing actually is, where it's required by law in Canada (the answer surprises a lot of people), the shelf-tag traps that make unit prices misleading if you're not careful, and how to use that little number to catch shrinkflation before it hits your cart.
What Unit Pricing Actually Tells You
A unit price converts a product's total price into a standard measurement — price per 100 grams, per 100 millilitres, per litre, or per individual item — so you can compare a 650 mL bottle against a 1 L bottle, or a 12-pack against a 24-pack, without doing mental math in the aisle. In theory, the lowest unit price is the better deal regardless of which package looks bigger or has flashier branding.
In practice, the shelf tag has already done the division for you. The trouble starts when you assume every tag on the shelf did that division the same way.
Is Unit Pricing Actually Required in Canada?
This is the part most shoppers get wrong, and it varies more than you'd expect. Unit pricing is a legal requirement only in Quebec. Under Quebec's Consumer Protection Act, retailers that use scanner/barcode pricing generally have to display both the total price and the price per unit of measurement, and comparable products on the same shelf have to use a consistent unit of measurement so the comparison is actually valid. Quebec has continued to tighten these rules in recent years.
Outside Quebec, there is currently no federal or other-provincial law requiring unit pricing. Where you see it — and many large chains do display it voluntarily across Canada — it's a business choice, not a legal obligation. That matters because a voluntary practice can be applied inconsistently: one chain might round differently, use a different base unit, or simply decide not to post it for certain categories.
It's also worth knowing that this isn't a settled debate. The Competition Bureau of Canada's 2023 grocery market study recommended that governments introduce "accessible and harmonized unit pricing requirements" nationwide, and a House of Commons agriculture committee made a similar recommendation around the same time. As of now, those are recommendations, not rules — nothing has changed the legal requirement outside Quebec. If a national standard is ever adopted, rules could become more consistent from coast to coast; until then, treat unit pricing as something to actively check for and double-check, not something guaranteed to be accurate or even present on every tag.
The Shelf-Tag Traps That Wreck a "Fair" Comparison
Even where unit pricing is displayed, it can quietly mislead you. Here's what to watch for before trusting the number at face value:
- Mismatched base units on the same shelf. One jar might be priced per 100 g while the jar right next to it is priced per 100 mL, or one item is "per unit" (each) while a similar item is priced by weight. You can't compare those numbers directly — you have to convert one of them yourself, or skip the comparison.
- Drained weight vs. total weight. Canned goods like tuna, fruit, or vegetables sometimes calculate unit price using the drained (solid) weight rather than the full can weight, while a competing brand uses total weight. The sticker price per 100 g can look similar even when the actual amount of food you're getting is quite different.
- Different pack sizes resetting the baseline. A store brand sold in a 1 kg bag and a name brand sold in a 500 g bag will both show a "per 100 g" price, but it's easy to misread the bigger number on the smaller package as the worse deal when the gap is actually tiny.
- Bundle pricing hides the per-item cost. Multi-packs often show the unit price for the whole bundle, not each item inside it, which can make a "value pack" look cheaper than it is once you figure out the per-item price yourself.
- Sale tags that don't recalculate. When an item is discounted, the shelf tag's unit price doesn't always update to reflect the sale price — it may still reflect the regular price, understating your actual savings or, less often, overstating them.
None of these traps mean unit pricing is useless — they just mean you should treat the number on the tag as a starting point, not gospel. When two tags use different units or one looks oddly generous, do a quick manual check rather than assuming the sticker got it right.
Unit Pricing Is Your Best Shrinkflation Detector
"Shrinkflation" — package sizes quietly getting smaller while the price stays the same or rises — has been widely discussed in Canada over the past few years, including by a federal grocery task force examining pricing practices. There's currently no Canadian law requiring brands to disclose when they've shrunk a package, so the responsibility for catching it falls on shoppers.
This is exactly where unit pricing earns its keep. If a bag of chips drops from 235 g to 200 g but the shelf price stays at $4.99, the total price looks unchanged — but the unit price per 100 g jumps noticeably. Tracking price-per-100g or price-per-100mL over time, rather than just the sticker price, is the most reliable way to notice a shrink before it becomes a habit you've paid for without realizing it.
A simple habit helps here: if a package you buy regularly suddenly looks a bit lighter, slimmer, or shorter, check the gram or millilitre count on the label against what you remember, and compare the unit price rather than the total price. It takes thirty seconds and it's the only real defence against a change that isn't required to be announced.
A Quick Way to Do the Math Yourself
When the shelf tag doesn't help — different units, no tag at all, or you just want to double-check it — the math is simple: divide the total price by the total size, then multiply to a common unit. For example, a 750 mL bottle at $4.49 works out to roughly $0.599 per 100 mL ($4.49 ÷ 750 × 100). A 1 L bottle of a competing brand at $5.79 works out to about $0.579 per 100 mL. Despite the higher total price, the second bottle is marginally cheaper per 100 mL. That kind of gap is easy to miss by eye and easy to catch with ten seconds of math.
If you want a deeper read on how sale pricing itself can be designed to nudge you toward the wrong comparison in the first place, MySmartGrocer's piece on how grocery stores use psychology around "sale" prices pairs well with this one. And if you're trying to time purchases around when prices are actually lowest rather than just when they're flagged as on sale, see the guide to when Canadian grocery flyers come out each week.
Where This Fits Into a Weekly Routine
Comparing unit prices item-by-item is a great habit, but it's also the kind of thing that's easy to do once and then forget under the time pressure of a real grocery run. That's part of what MySmartGrocer is built to help with: it scans flyers from major Canadian grocers — including No Frills, FreshCo, Metro, Loblaws, Food Basics, Sobeys, Walmart, and Real Canadian Superstore — and builds a 7-day meal plan and store-grouped shopping list around what's genuinely discounted that week, so you're comparing real deals rather than just package size.
You can try it with a 7-day free trial, after which MySmartGrocer is $6.99 CAD per month, or $75 CAD per year for anyone planning to stick with it long-term. Either way, pairing the app's deal-tracking with your own quick unit-price checks at the shelf is the combination that actually protects your grocery budget — from the big weekly swings and the small, quiet ones.